Church key initially referred to a simple hand-operated device for prying the cap (called a “crown cork” or “bottle cap”) off a glass bottle; this kind of closure was invented in 1892. The first of these church key style openers was patented in Canada in 1900.
The necessity to pierce the can first was a nuisance, and this can opener design did not survive. In 1920, Edwin Anderson patented a can opener with pivoted handles with which to hold the can in one hand while a key-type handle geared to a cutting wheel is turned with the other cutting the outside of the lip, a side can opener, unlike the gramophone-like orientation of most contemporary can openers, in effect a hand-held pliers version of the Swanson Can-Opener. In 1925, the Star Can Opener Company of San Francisco, California, US had improved Lyman’s design by adding a second, serrated wheel, called a “feed wheel”, which allowed a firm grip of the can edge. This addition was so efficient that the design is still in use today.
Several can openers with a simple and robust design have been specifically developed for military use. The P-38 and P-51 are small can openers with a cutter hinged to the main body. They were also known as a “John Wayne” because the actor was shown in a training film opening a can of K-rations. The P-38 can opener is keychain-sized, about 1.5 inches (38 mm) long, and consists of a short metal blade that serves as a handle (and can also be used as a screwdriver), with a small, hinged metal tooth that folds out to pierce the can lid. A notch just under the hinge point keeps the opener hooked around the rim of the can as the device is “walked” around the rim to cut the lid out. A larger version, called P-51, is somewhat easier to operate. P-38 was developed in 1942 and was issued in the canned field rations of the United States Armed Forces from World War II to the 1980s. The P-38 and P-51 are cheaper to manufacture and are smaller and lighter to carry than most other can openers. The device can be easily attached to a keyring or dog tag chain using the small punched hole.Official military designations for the P-38 include “US Army pocket can opener” and “Opener, can, hand, folding, type I”. As with some other military terms (e.g., jeep), the origin of the term is not known with certainty. The P-38 and P-51 openers share a designation with the Lockheed P-38 Lightning and North American P-51 Mustang fighters, however this is coincidental. The most likely origin of the name is much more pedestrian; the P-38 and P-51 measure 38 mm (1.5 in) and 51 mm (2.0 in) in length respectively.
Whereas all previous openers required using one hand or other means to hold the can, can-holding openers simultaneously grip the can and open it. The first such opener was patented in 1931 by the Bunker Clancey Company of Kansas City, Missouri and was, therefore, called the “Bunker”. It featured the now standard pliers-type handles, when squeezed would tightly grip the can rim, while turning the key would rotate the cutting wheel, progressively cutting the lid along the rim. The cutting wheel is coupled to a serrated feed wheel as in the Star design and rotated in the opposite direction by interlocking cogwheels reducing friction. The Bunker company was absorbed by the Rival Manufacturing Company, also of Kansas City, in 1938. A new style of the can opener emerged in the 1980s. Whereas most other openers remove the lid by cutting down through the lid from the top just inside the rim, removing the top and leaving the rim attached to the can, these use a roller and cutting wheel to cut through the outside seam of the can. The can is left with a relatively safe, non-jagged edge, and the top can be set back on top as a cover, although it does not provide a seal. The feed wheel teeth have a somewhat finer pitch than those of earlier designs and reside at the bottom of a V-shaped groove, which surrounds the rim on three sides at the point of action.
Is bottle opener a second class lever?
A bottle opener is an example of second order lever.
The shape and design of some of these early “church key” opener’s fulcrum hole resembled a large old key’s dual-node keyring hole. In 1935, steel beer cans with flat tops appeared, and a device to pierce the lids was needed. The same opener was used for piercing those cans. Made from a single piece of pressed metal, with a sharp point at one end, it was devised by D. F. Sampson, for the American Can Company, who depicted operating instructions on the cans. The church key opener is still being produced, sometimes as part of another opener. For example, a “butterfly” opener is often a combination of the church key and a serrated-wheel opener. Beer and soda cans began in the mid-1960s to feature pop-tabs, which were rings attached to cans. These tabs eliminated the need for church keys to open the cans.General-purpose can openers first appeared in the 1850s and had a primitive claw-shaped or “lever-type” design. In 1855, Robert Yeates, a cutlery and surgical instrument maker of Trafalgar Place West, Hackney Road, Middlesex, UK, devised the first claw-ended can opener with a hand-operated tool that haggled its way around the top of metal cans.
Around the time of World War II, several can openers were developed for military use, such as the American P-38 and P-51. These featured a robust and compact design with a pull cutting blade hinged to a corrugated handle with a pivot. Electric can openers were introduced in the late 1950s and met with success. The development of new can opener types continues with a recent redesign of a side-cutting model.
A similar device that incorporates a small spoon at one end and a bottle opener at the other is currently employed by the Australian Defence Force and New Zealand Army in its ration kits. The Field Ration Eating Device is known by the acronym “FRED”. It is also known as the “Fucking Ridiculous Eating Device”.In Slovenia a somewhat rounded version of a P-38 is known as “sardine can opener”, because in the 1990s such openers were usually packed with cans that did not feature the pull-top pre-scored lid. A non-folding version of the P-38 used to be very common in Israeli kitchens, and can still be found in stores, often sold in packs of five.By 1820, canned food was a recognised article in Britain and France and by 1822 in the United States. The first cans were robust containers, which weighed more than the food they contained and required ingenuity to open, using whatever tools available. The instruction on those cans read “Cut round the top near the outer edge with a chisel and hammer.” The gap of decades between the invention of the can and can opener may be attributed to the functionality of existing tools versus the cost and effort of a new tool.
The first rotating wheel can opener was patented in July 1870 by William Lyman of Meriden, Connecticut, US and produced by the firm Baumgarten in the 1890s. The can was to be pierced in its centre with the sharp metal rod of the opener. Then, the length of the lever had to be adjusted to fit the can size, and the lever fixed with the wingnut. The top of the can was cut by pressing the cutting wheel into the can near the edge and rotating it along the can’s rim.
Food preserved in tin cans was in use by the Dutch Navy from at least 1772. Before 1800, there was already a small industry of canned salmon in the Netherlands. Freshly caught salmon were cleaned, boiled in brine, smoked and placed in tin-plated iron boxes. This canned salmon was known outside the Netherlands, and in 1797 a British company supplied one of their clients with 13 cans. Preservation of food in tin cans was patented by Peter Durand in 1810. The patent was acquired in 1812 by Bryan Donkin, who soon set up the world’s first canning factory in London in 1813.
Also called Tin can key can-opener. During the 1800s, the canning process was mechanised and refined, with can walls becoming thinner. The twist-key can-opener was patented by J. Osterhoudt in 1866. There still was no general-purpose can-opener, thus each can came with a spot-welded or soldered-on twist-key can-opener which snapped off after fatiguing the metal by bending at a thin region. Each food-type had its own can-type, and came with its own can-opener-type. Tinned fish and meat were sold in rectangular cans. These cans were fitted with a twist-key that would roll around the top of the can, peeling back a pre-scored strip. Coffee, beans, and other types of meat were packaged in cylinders with metal strips that could be peeled back with their own kinds of built-in keys that would roll around the top of the can. Cans of milk used puncture devices.The can opener consisting of the now familiar sharp rotating cutting wheel that runs round the can’s rim to cut open the lid was invented in 1870, but was considered very difficult to operate for the ordinary consumer. A more successful design came out in 1925 when a second, serrated wheel was added to hold the cutting wheel on the rim of the can. This easy-to-use design has become one of the most popular can opener models.
Most military ration can openers have a very simple design and have also been produced for civilian use in many countries. For example, small folding openers similar to the P-38 and P-51 were designed in 1924 and were widely distributed in the Eastern European countries.
Another similar device was included with British Army “Operational Ration Pack, General Purpose” 24-hour ration pack and “Composite Ration Pack” rations. At one time they were manufactured by W. P. Warren Engineering Co., Ltd. The instructions printed on the miniature, greaseproof paper bag in which they were packed read: “Their design is similar, but not identical, to the P-38 and P-51 can openers.”
The first electric can opener was patented in 1931 and modeled after the rotating wheel can opener design. Those openers were produced in the 1930s and advertised as capable of removing lids from more than 20 cans per minute without risk of injury. Nevertheless, they found little success. Electric openers were re-introduced in 1956 by two American companies. Klassen Enterprises of Centreville brought out a wall-mounted electric model, but this complex design was unpopular too. The same year, Walter Hess Bodle invented a freestanding device, combining an electric can opener and knife sharpener. He and his family members built their prototype in his garage, with daughter Elizabeth sculpting the body design. It was manufactured under the “Udico” brand of the Union Die Casting Co. in Los Angeles, California, US and was offered in Flamingo Pink, Avocado Green, and Aqua Blue, popular colors of the era. These openers were introduced to the market for Christmas sales and found immediate success. A can opener (North American and Australian English) or tin opener (British English) is a mechanical device used to open metal tin cans. Although preservation of food using tin cans had been practiced since at least 1772 in the Netherlands, the first can openers were not patented until 1855 in England and 1858 in the United States. These early openers were basically variations of a knife, though the 1855 design continues to be produced.
How do you open a non twist off bottle?
The very tip of a butter knife can be used to bend just a small section of the cap away from the bottle. Then position the tip of the knife under the lip, so that it’s between the cap and the glass rim. In a careful and swift motion, tap the handle of the knife on the counter to pop off the cap.
In 1858, another lever-type opener of a more complex shape was patented in the United States by Ezra Warner of Waterbury, Connecticut, US. It consisted of a sharp sickle, which was pushed into the can and sawed around its edge. A guard kept the sickle from penetrating too far into the can. The opener consisted of several parts which could be replaced if worn out, especially the sickle. This opener was adopted by the United States Army during the American Civil War (1861–1865); however, its unprotected knife-like sickle was too dangerous for domestic use. A home-use opener named the “Bull’s head opener” was designed in 1865 and was supplied with cans of pickled beef named “Bully beef”. The opener was made of cast iron and had a very similar construction to the Yeates opener, but featured a more artistic shape and was the first move towards improving the look of the can opener. The bull-headed design was produced until the 1930s and was also offered with a fish-head shape.
P-38s are no longer used for individual rations by the United States Armed Forces, as canned C-rations were replaced by soft-pack MREs in the 1980s. They are, however, included with United States military “Tray Rations” (canned bulk meals). They are also still seen in disaster recovery efforts and have been handed out alongside canned food by rescue organizations, both in America and abroad in Afghanistan. The original US-contract P-38 can openers were manufactured by J. W. Speaker Corp. (stamped “US Speaker”) and by Washburn Corp. (marked “US Androck”), they were later made by Mallin Hardware (now defunct) of Shelby, Ohio and were variously stamped “US Mallin Shelby O.” or “U.S. Shelby Co.”
978 Likes, 51 Comments. TikTok video from Marcel “Le Corgi” (@lecorgi): “#stitch with @littykittytv when you hear your human crack open a cold one #BottleOpener #CorgiButts #4thOfJuly #BlueMoon #fyp”. original sound – Marcel “Le Corgi”.802 Likes, TikTok video from BoyMomma0405 (@boymomma_0405): “Best Present ever.😍🐶 #bottleopener#foryoupage#corgi#loveit #scoobydoo”. Say So – Doja Cat.TikTok video from Mia_Funny_Box (@mia_funny_box): “Corgi bottle opener#Funny #Pretty #Cute #Mini #Homedecor #uktiktok #fyp #foryoupage #miarecommendation”. original sound – Mia_Funny_Box.
99 Likes, TikTok video from Benny Blanco the Corgi (@bennythecorgii): “#onthisday #corgisdoingsthings #fyp #dogsoftiktok #foryoupage #corgibottleopener”. original sound – Benny Blanco the Corgi.
82 Likes, TikTok video from Whelmed (@snart25): “#stitch with @littykittytv #corgi #drpepper #bottleopener #fyp #dogsoftiktok #MillionActsofLove”. original sound – Whelmed.
What are can openers called?
A can opener (North American and Australian English) or tin opener (British English) is a mechanical device used to open metal tin cans.
120 Likes, TikTok video from user9966944212681 (@fyptoys6): “Can your dog open the bottler for you#fip #foryou #foryoupage #bottleopener #dog #pet #cute #everdayitems #corgi”. Number 2 (feat. Future & 21 Savage) – KSI.110 Likes, TikTok video from Parsons (@mooseandfriends87): “guess it won’t work#corgibottleopener #corgisoftiktok #dogsiblings”. original sound – Parsons.
Bottle openers make our lives easier. This makes a great gift for people with arthritis. Equipped with a handy magnetic back, a unique bottle cap shape, and two different mechanisms for opening bottles, we love this product! Pop open your favorite drink with this unique and fun handmade engraved corgi butt wall mounted bottle opener! Each bottle opener is made of sturdy and durable cast iron, and features a cute corgi butt design that is laser engraved. The wood has a grain, giving each bottle opener its own unique character. It’s a perfect gift for any corgi lover or beer enthusiast, or for yourself as a fun addition to your collection.
This bottle opener not only adds a touch of humor and personality to your bar or kitchen decor, but it’s also a functional tool that makes opening bottles effortless. It mounts easily to any wall with two screws or it has a hook on the back if you just want to use it as decorPainter’s simple design, which he called “crown corks,” used a metal lid lined with a thin cork disc for improving the seal and protecting the drink from the metal’s toxicity. (Today plastic is typically used instead of cork.) The caps had a corrugated edge that would be pressed around the rim of the top of a bottle, by hand or by machine. They were designed for one-time use, they were inexpensive, and were completely leak-proof. Painter received U.S. patent no. 468,258 for the invention in 1892. Two years later, he patented the first bottle cap lifter, now known typically as simply a “bottle opener.”
Painter founded his own manufacturing business, the Crown Cork and Seal Company, in Baltimore and set out on a campaign to convince bottlers that his cap was the right cap to use on their products. This was a challenge at first, because the bottles would have to be made a specific way for the crown caps to work, with a special neck tip design for the cap’s metal “teeth” to grip onto when it was pressed around the bottle. There would also need to be some way for people to press the caps onto the bottles efficiently, so that proper force was applied and so that the seal would be created correctly without breaking the bottle.Some inventions appear small at first glance, but often a closer look proves a simple device can have a revolutionary impact. Such is the case with the “crown cap,” the ubiquitous, indispensable style of bottle cap found on beer and soft drink bottles around the world, created in 1891 by William Painter.
What can I use instead of a bottle opener?
Scissors Scissors are a great option for opening bottles because you have the added leverage of two different blades. All you have to do is place the bottle cap between the two blades, lightly squeeze, and push the scissors upward.
Painter provided his own answer to this problem. By 1898, he had created a foot-powered crowner device to sell to bottlers and retailers so that they could seal the bottles with his caps quickly and easily. This helped to drive acceptance of his bottle caps rather quickly around the world. By 1906, his company was opening manufacturing plants in nations such as Germany, France, Brazil and Japan. Painter died in July of that year, earning more than 80 patents over the course of his life.William Painter was born in Triadelphia, Maryland in 1838. Though he had developed a number of ingenious devices such as a paper-folding machine, safety ejection seat for passenger trains, and a machine for detecting counterfeit currency, none were as successful as he had hoped they would be, and he soon came to believe that his best chances at finding fortune would come from creating a disposable object that would sell in very large quantities.
The result of his years of persistence and undying innovative spirit was the crown cap, which he devised in 1892. He was inspired by the increasing popularity of carbonated drinks, which were widely available in drugstores and pubs by the 1880s, but posed a packaging challenge for those who wanted to take these bubbly beverages home with them. The stoppers used in most glass bottles at the time, which were typically made of metal, cork or porcelain, did not provide a sufficient seal to keep in the carbon dioxide that created the drinks’ bubbles. Or worse, if they made contact with the bottles’ contents, they would make the liquid toxic, and thus, undrinkable.
In the decades that followed, the company continued to grow and prosper, and by the 1930s it was providing nearly half the world’s bottlecaps. In 1958, the company moved its corporate headquarters to Philadelphia. Crown Cork & Seal has continued to innovate in packaging for food and beverages, in addition to customizing bottling equipment for the soft drink industry. In 2003, the operation became part of Crown Holdings, Inc., a public holding company. Its headquarters remain in Philadelphia and the company continues to lead the way for innovative packaging technology. With more than $9 billion in annual sales, it has also continued to expand internationally, with operations in more than 40 countries and employing more than 25,000.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
The corgi dog breed is much beloved with families and travelers. They have a lineage that goes back centuries to Wales in the United Kingdom. While German Shepherds, Golden Retrievers, and Poodles might be incredibly popular in the United States, the humble, loving Corgi has its own devout following. If you are, or have a Corgi lover in your life, then this Corgi Butt Bottle Opener makes a great gift.We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
What is the history of the bottle opener?
They were designed for one-time use, they were inexpensive, and were completely leak-proof. Painter received U.S. patent no. 468,258 for the invention in 1892. Two years later, he patented the first bottle cap lifter, now known typically as simply a “bottle opener.”
This Corgi Butt Bottle Opener is styled to look very much like the classic rear end of the Corgi dog breed. It is styled in brown and white with the bottle opener device built into the butt hole of the dog. This gives you a superior degree of leverage, while also being able to clearly see that the bottle cap is releasing properly.Choose in store pickup at either our NYC address or Wall, NJ warehouse. While usually orders are ready in a few hours, due to holiday time demands, it could take up to 24 hours. You will receive a notification as soon as pickup is ready.
Is a bottle opener a Class 1 lever?
Levers in which load is in between effort and fulcrum are called class II levers. The image depicted here is a bottle opener. Here the effort arm is longer than load arm, moreover load is in between effort and fulcrum. So this lever is belongs to class II lever.
Is Shopify PCI compliant? Yes, Shopify is certified Level 1 PCI DSS compliant. This compliance extends by default to all stores powered by Shopify. We are very serious about securely hosting your store and have invested significant time and money to certify our solution is PCI compliant. From annual on-site assessments validating compliance to continuous risk management, we work hard to keep our shopping cart and ecommerce hosting secure.
How do you open a Corona without an opener?
And these are going to work the way your traditional can openers. Work. So i’m just going to grab the bottle. Pop this portion of the tongs. Under the lip.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
We’re sorry to inform you that we no longer support this browser and can’t confirm that everything will work as expected. For the best Shapeways experience, please use one of the following browsers:Perfect for those who don’t want to use too much force or strength to open their wine, the lever corkscrew uses a small amount of leverage to open a bottle. All you have to do is push down the lever and pull it back up. Note that some lever corkscrews may not work successfully for some types of synthetic corks.
What are the four types of bottle opener?
What are the Different Kinds of Wine Openers?Wine Key and Waiter’s Corkscrew. … Wing Corkscrew. … Electric Wine Opener. … Ah-So Cork Puller. … Air Pressure Pump. … Tabletop/Bar/Legacy Corkscrew. … Lever Corkscrew. … Twist And Pull Corkscrew.
This wine opener looks strange, but it’s a tried and true wine opening tool that can be easily stored or carried. To use, work in the two prongs between the cork and bottle. Once all the way in, twist and pull to bring out the cork. It’s also important to note that this cork puller takes considerably more strength to use than the above methods, and is a preferred tool for older corks.Possibly the most expensive option on the list, this is one of the most popular choices among serious wine collectors. Incredibly easy to use, you simply need to place the bottle below the corkscrew (some models clamp the bottle in), pull down the lever to push the worm through the cork, and then pull the lever back up.
If you’re a wine drinker, chances are you have a preference for a particular type of wine opener. But if you’re looking to try something new, don’t have your usual opener with you, or you’re expanding your wine collection, learning how to use different kinds of wine openers and which situations they work for is essential.
An electric wine opener is perfect for beginners or anyone who wants a simple, easy-to-use wine opener. Just make sure to keep it charged and ready to use.The waiter’s corkscrew remains one of the most popular choices for wine openers thanks to its simplicity and portability. To use this opener, screw into the top of the wine cork, position the fulcrum on the corner of the bottle’s lip, and use leverage to pull the cork out.
The wing corkscrew is one of the oldest types of wine openers that is still in use today. This opener needs more applied force than other openers, making it less popular than more modern corkscrews. To use a wing corkscrew, you’ll need to screw the metal worm into the cork and then push both wings down to pop the cork out.
This is a newer style of wine opener that combines the idea behind the Ah-So and the Twist and Pull. This is the most ideal corkscrew for older, fragile corks; however, it’s also one of the more expensive options.
The best wine opener is largely dependent on your preferences, style, and budget. Where some wine lovers prefer smaller, portable wine openers, others may prefer bar-mounted corkscrews. Where some people love electric openers, others may prefer a more traditional approach. To find the wine opener that best matches your lifestyle, jump to the list below.
This wine opener makes use of air pressure to push the cork out from the bottle. Simply insert the needle through the cork and pump until the cork is pushed from the bottle.Less popular than some of the above options due to the larger amount of effort needed to pull out the cork, the twist and pull corkscrew came into use for its sleekness and simplicity. Just screw in the worm and pull!
Holding a key in your dominant hand and a beer bottle in the other, place the tip of the key under the cap. Then you can just push upwards, wiggling it around if necessary, until the cap pops right off.Scissors are a great option for opening bottles because you have the added leverage of two different blades. All you have to do is place the bottle cap between the two blades, lightly squeeze, and push the scissors upward.
If you’re hosting a party outside, there’s a good chance you have some extra bottles laying around. This TikTok-approved hack actually works! All you need to do is flip one bottle upside down and align the cap with a second upright bottle. With just a flick of the wrist, you can pop the top cap off in seconds.Basically any surface with a defined edge can work as a makeshift bottle opener. However, it’s advised that you save this hack for outdoor tables or ones you don’t mind damaging. Temperatures are rising, which means it’s prime time for outdoor gatherings. And in order to host a successful summer party, you’ll need to stock up on the essentials. Do you have an outdoor blanket? A cooler? Delicious picnic-approved snacks? If you want to use another bottle to open your beer and add extra style points, you need to try this hack that involves kicking the bottom of the bottle.For this hack, you should hold the bottle by the neck and place the lighter at a slight angle under the bottle cap. Using your other hand, you can push the lighter down until it pops the cap on the other side.
Just like there are hacks to open wine bottles without a corkscrew, you can rely on some handy hacks to crack open a cold one without a bottle opener. With your choice of several common objects, you can easily use leverage to pop off the metal cap and get back to celebrating. But whatever you do, please don’t use your teeth (your dentist will thank you).
You’ll need to take off your belt for this one, but getting to sip on a cold beer is worth the extra step. All you need to do is place the buckle under the cap and use it just as you would with a standard bottle opener.
Gabby Romero is Delish’s editorial assistant, where she writes stories about the latest TikTok trends, develops recipes, and answers any and all of your cooking-related questions. She loves eating spicy food, collecting cookbooks, and adding a mountain of Parmesan to any dish she can. But there’s one major item on our checklists that often gets overlooked: a bottle opener. There are few things worse than reaching for a cold beer and discovering that you left your bottle opener at home. But you shouldn’t let this minor party foul ruin your night.
It’s unlikely that you’ll be bringing this with you to a backyard barbecue, but an eyelash curler is an effective substitute for a bottle opener in a pinch.
Place your hand over the beer bottle and carefully place the edge of your ring under the bottle cap. From there, you can carefully pull your hand up and out to remove the bottle cap.
Shipping charges are based on your delivery location and order weight/dimensions. You will be shown the cost and approximate delivery date during checkout.Perpetual Kid is the best place to shop for unique gifts to entertain your inner child! We’re a small business in Virginia that offers the best selection of fun gifts, free shipping and special offers!
What is a 1st 2nd and 3rd class lever?
It’s the position of these three points the force. The load and the fulcrum. That distinguishes the type or class of lever. There are three classes of levers.
Shop fun and unique gifts at our Perpetual Kid Gift Guide. Browse our popular selection of the hottest Birthday Gifts and Greeting Cards. Make your presents more memorable.Our Corgi Butt Bottle Opener is a hilarious choice when you’re looking to add a wall mounted opener to your home bar. You can use it to efficiently open bottles when you need a quick laugh. Makes an excellent gift for birthdays, holidays, housewarming parties or just because!
Reduce, Reuse, Recycle! Not only are these leashes and collars resourceful, made of recycled bicycle tires, they prevent bacteria growth by 1000 times. No stink! In addition, there is a handy bottle opener attached for pup parents in a pinch!
Your privacy is of the utmost importance to us. Your information will not be shared with anyone outside of Corgi Spirits. Please refer to our Privacy Policy for more information.Some of the technologies we use are necessary for critical functions like security and site integrity, account authentication, security and privacy preferences, internal site usage and maintenance data, and to make the site work correctly for browsing and transactions.
Without these technologies, things like personalized recommendations, your account preferences, or localisation may not work correctly. Find out more in our Cookies & Similar Technologies Policy.To enable personalized advertising (like interest-based ads), we may share your data with our marketing and advertising partners using cookies and other technologies. Those partners may have their own information they’ve collected about you. Turning off the personalized advertising setting won’t stop you from seeing Etsy ads, but it may make the ads you see less relevant or more repetitive.
Personalized advertising may be considered a “sale” or “sharing” of information under California and other state privacy laws, and you may have a right to opt out. Turning off personalized advertising allows you to exercise your right to opt out. Learn more in our Privacy Policy., Help Center, and Cookies & Similar Technologies Policy. In order to give you the best experience, we use cookies and similar technologies for performance, analytics, personalization, advertising, and to help our site function. Want to know more? Read our Cookie Policy. You can change your preferences any time in your Privacy Settings. Keep collections to yourself or inspire other shoppers! Keep in mind that anyone can view public collections—they may also appear in recommendations and other places. View Etsy’s Privacy Policy
Get your hands on possibly the best invention since sliced bread with this Cakewich baking mold. The silicone mold is shaped like a big slice of bread and comes with a recipe for a delicious peanut butter and jelly pound cake.
Add some classic American design to any room with this vintage pickup truck bed. The beds are handmade, can be painted any color you like and come with a plexiglass window and working headlights. Ideal for any car enthusiasts.Indulge in the exotic taste of this Thai blue tea. The tea is made from a blend of tea leaves and butterfly pea flower. Just like the iconic Tatooine Blue Milk from Star Wars, this tea will transport you to a galaxy far, far away.
The Sweepovac Kitchen Vacuum is a powerful machine that’s designed to clean any mess in your kitchen. The vacuum sucks up large amounts of crumbs and other small particles, while the reusable bag makes it easy to clean.
Guess what? Corgi butt! Add some cuteness and humor to any kitchen with the wall mounted corgi butt bottle opener. Its made of high quality resin with a metal bottle opener. The perfect gift for beer lovers and dog lovers alike.
Protect your expensive handbags from the elements with this clear handbag rain cover. The cover is lightweight, durable and they’re available in different sizes. The covers will keep your Gucci handbags looking new for longer.
Wear a piece of world history with this WW2 M1 Garand ring. The ring is inlaid with timber from an M1 Grand rifle stock that has seen active duty. The timber is paired with sandblasted tungsten carbide for a unique design.Kick back and enjoy a cold beer while you wait for a bite with this fishing reel beer koozie. The koozie features 50ft of pre-wound, 8lb fishing line with a hook and sinker. Take a sip, reel in a little until you get a bite.
Step into the world of The Dude with The Big Lebowski Rug. This classic movie-themed rug is the perfect addition to any fan’s home decor. Soft, plush, and truly unique, it’s a must-have for fans of the Coen brother’s film.Become a Spartan warrior on the battlefield when you wear this Master Chief Airsoft Helmet. The helmet is strong and durable with mesh for extra protection. The helmet features working lights and has customized paint options.
This unique Cat Exercise Wheel provides your kitty with hours of fun and physical activity. This exercise wheel is made of solid wood and a blanket cloth to give your kitty the platform it needs to keep healthy, active and entertained.
Upgrade your mancave or add a bar vibe to any bathroom with this cool beer keg urinal. The urinals are made from repurposed, food grade stainless steel kegs. They feature a 3/4″ threaded fitting and include a wall bracket.
What is a bottle opener called?
See definition of bottle opener on Dictionary.com. noun corkscrew.
Marry the princess in your life with the Super Mario Wedding Band. The ring is made of tungsten carbide and engraved with a level from Super Mario. The perfect wedding band to reminisce on your favorite childhood game.
