Skip to content

Size 14 Mens Cowboy Boots

Introduced in the mid-1960s, Dan Post Boots is synonymous with “Handcrafted Cushion Comfort.” Boots crafted with the finest exotic skins and premium leathers, Dan Post employs technologically advanced materials to ensure that your boots are comfortable from the first step.Additionally, to accommodate a foot length of 287.86mm (UK 11), the shoes internal length (or length of the last) would need to be between 295-307mm. The individual manufacturer will use this information to decide upon the appropriate size and/or conversion to use that will best suit their customer.

As you can imagine this is a question I get asked a lot and I’ll try my best to answer it here. The short answer is that it could be either and is completely dependent on whether manufacturers decide to round their sizes up or down. Most commonly a UK 11 will be referred to as either an EU 45 or EU 46.The majority of the shoes available in the UK are made in EU sizes. This is then converted into the equivalent UK size. The issue here is that these sizing systems aren’t directly comparable. The exact dimensions of a UK 11 (measured by foot length) as defined by ISO 19407 is 287.86mm, whereas an EU 45 is 286.6mm and an EU 46 is 293.3mm. As you can see, a UK 11 is somewhere in between.

The individual product pages will offer the sizes stated by the manufacturer and we will regularly update these pages with our own sizing suggestions. However, my best advice is to just try them. We offer free UK delivery and hassle free returns.However, the process of trying on western boots isn’t like purchasing other types of footwear. That said, here’s a guide on how to fit cowboy boots, plus a few tips on how to stretch them for a faster break-in.

What size is 13 in boots?
Double-H Boots Size ChartFoot Width (inches)SizeBC11.53.8″4.0″123.9″4.1″134.0″4.2″
Since cowboy boots go all the way up to the calf, you need to make sure your new boots feel comfortable around this area. That said, the shaft shouldn’t be too tight around your calves, but your ankles shouldn’t have too much room either. Ideally, your boot will have a one to two-inch space around your calf.

Moreover, the toes should have enough space to wiggle so they aren’t cramped together. When it comes to the heel, a half-inch or less of heel slippage at the outset shouldn’t concern you, as once you break them in, it will adjust. Sometimes, the initial slip is necessary to make room for the boot to accommodate your foot as it wears in.
When looking at how cowboy boots fit, you need to consider your calf, instep, heel, ball, and toes. Here’s how cowboy boots should fit these parts of the leg.

If the boot fits well around the instep, the slip will eventually go away as the leather becomes more pliable with wear. If the fit around the instep isn’t right, the leather can cut off the blood supply to the foot, causing a numb sensation. This is a sign you need to replace your boots with wider ones.
New cowboy boots will slip a bit at the heel at first, which is required for the right fit. Eventually, the leather will adjust to the shape of your foot and the slippage will decrease.How the instep feels is the first thing to consider when it comes to how cowboy boots fit. It should be snug enough to keep the heel in place. However, it shouldn’t be so tight that blood can’t freely circulate, as that’s what causes discomfort.

Note that it’s not uncommon for the instep to fit, but to have issues with the heel. At first, it may feel as if your heel doesn’t fit right, which is known as heel slippage. However, this doesn’t have to be an issue. In fact, the heel slip should be there, but not too large. Otherwise, it would mean the boots are too big and you need a smaller size.
Now that you know how cowboy boots should fit and how to stretch them if necessary, it’s time to learn how to style them. Whether you use them for work, play, or competition, cowboy boots are a fashion piece that deserves to be styled up. Here are a few tips on how to wear cowboy boots for both women and men.

What does 12D mean in cowboy boots?
medium A: Letters after size 12 indicate width of boot. A 12D(M) with M standing for medium. For example, I wear an 8 EE(2E) or EW(extra wide).
When fitting a new pair of cowboy boots, first you need to put your foot into the boot’s shaft and firmly hold the pull tabs or holes. You will hear a muffled popping sound as your foot enters its sitting place once you pull the boots past the resistance point in the arch. The resistance point will come from the top of your foot in the arch area and your heel inside the shaft.Cowboy boots are much more than just a fashion statement. They are made to protect your feet in challenging work conditions but are also used for riding, parties, and casual walks. Since some cowboy boots are made of thick and stiff leather, they may feel uncomfortable at first, but they will eventually break in and provide comfort. Guys have just as many styling options as ladies. The most popular way to wear cowboy boots is with a pair of jeans as that work well whether you’re working on the ranch or going to a bar. When it comes to the jeans cut that goes great with cowboy boots, you can’t go wrong with a bootcut and straight-leg cut. This will give your boots and legs plenty of space without compromising the right fit. Overlook Boots is your one-stop shop for high-quality work boots and apparel at affordable prices. Our selection of work, western, hunt and dutry boots is unmatched. We are a family owned business with strong values. The entire Overlook Boots team takes pride serving the hard working men and women of this country.

Cowboy boots will stretch out with wear because the leather will expand. But, if you want to accelerate the break-in process, here are a few tips on how to do that:The boot’s toe box surrounds the front part of the foot and the toes. Regarding cowboy boots, pressing toes to see whether you have enough room won’t work – it may even damage the toe box. To avoid destroying your new cowboy boots, just wiggle your toes to check whether the fit is right. They should have enough room to move easily within the boot without discomfort. If you’re wondering how cowboy boots should fit, you’re at the right place. There are several ways to determine how cowboy boots fit that can help you avoid buying ill-fitting footwear you’ll need to return. The instep refers to the upper part of your foot between your ankles and toes. The instep is the most critical determining factor when looking at how cowboy boots fit. Getting the right fit around the instep is vital as it ensures your heel stays in place, making walking in your boots comfortable.Once you have your new pair of cowboy boots, walk around in them to make sure you have the right heel lift. Remember that anything more than ⅛ of an inch will mean the boots are too large and anything less will mean your boots are too small.

Are cowboy boot sizes smaller?
Cowboy boots fit differently than other types of footwear. Ideally, they’ll be snug but comfortable to support time spent on feet or in the saddle. Note that cowboy boots tend to run slightly large, so you may end up buying a boot size smaller than your standard size.
Please check out our selection of products, and let us know if you have any questions or feedback via email or at 717-759-3100. We are available Mon-Fri, 9am-5pm ETWhat’s more, the socks you wear will also impact the way your boots fit, so it’s a good idea to use the same socks you’ll be wearing in the boots. That said, a thicker sock can mean you’ll need a larger boots size, whereas a thinner sock may result in you needing a smaller size.

Sitting at the widest section of the boot, the ball of the foot is the area where the boot bends when you take a step. The boot is too short if the ball of your foot sits too far forward and will cause discomfort. When boots fit right, the ball of your foot will sit securely within the widest boot part.
Cowboy boots fit differently than other types of footwear. Ideally, they’ll be snug but comfortable to support time spent on feet or in the saddle. Note that cowboy boots tend to run slightly large, so you may end up buying a boot size smaller than your standard size.For example, many women wear cowgirl boots with jeans, whether they work at the office or farm. That said, skinny jeans work well with cowgirl boots. Add a stylish top and you’re good to go. You either tuck the jeans into your boots or wear them over your boots, depending on the width of your jeans and personal preferences.

Cowgirl boots are much more than just riding boots. And with their rising in popularity, the boot models and accessories have grown to meet demand. Regardless of your lifestyle or fashion taste, there are numerous options for how to style cowgirl boots.
Although jeans go exceptionally well with cowboy boots, chinos and khakis also do wonders. When it comes to the upper part of the body, collared shirts and t-shirts are always a good idea if you pair the colors well.

What size is 11 in cowboy boots?
BootsUS/CA SizesLength (in)width EE9.510.4375″4.3″1010.5625″4.4″10.510.75″4.4″1110.9375″4.5″
That said, the upper part should touch your instep slightly when you put on your cowboy boot. The boot is too small if the leather feels too tight on your instep. However, if it feels too loose, you’ll need a smaller size.With a tradition of 200 years, cowboy boots are highly durable, comfortable, and stylish. With so many styles to choose from, you can find a pair of cowboy boots for numerous occasions whether for work or play. All you need to do is ensure they fit well, and you’re good to go. Just follow our tips and you’ll be enjoying your new boots in no time.

High-quality cowboy boots won’t necessarily come perfectly shaped to your foot. While for some people, the boots will fit perfectly from the start, for others, they’ll be stiff at first. Fortunately, as you wear them, the lather and the footbed will adjust to your foot’s shape and will become more comfortable over time.Adelante provides far and away the best value for wide feet, offering fully handmade boots in C, D, E, EE, EEE, EEEE, and even EEEEE widths. I visited Guatemala to make my own pair and can attest to their quality. (When I’m not the guy making them, of course.) All of their shoes, including Chelseas, come in wide widths in case you want to explore their styles, and a big bonus is that the brand was founded by a couple of humanitarians who put a ton of work into ensuring they were bringing measurable stability and prosperity to the Pastores region where they’re made.

The widest boots you’ll find come from Nicks Handmade Boots, which have the following widths (deep breath): AA, A, B, C, D, E, EE, F, FF, FFF, and FFFF. Once you’re past EE, brands seem to decide on their own whether they go with Es or Fs, but you get the picture. These boots are incredibly solid and different models are made to serve firefighters, linemen, foresters, and just anyone looking for a cool pair of boots. Mine, above, are the Urban Loggers.
The break-in period is defined as the time it takes before the boot fits as perfectly as it should. In order for your foot to become accustomed to the boot, it must first adjust to the foot.Many bootmakers use thick, durable materials that don’t break in easily. Even if you’re wearing the correct size, you might get a bit of heel slippage due to the stiff materials but a quarter-inch heel slip is acceptable while trying on any heritage-style boots. So don’t be concerned if there’s some sloppiness.

A lot of people have to make compromises with width because a lot of companies only sell one width, which is unfortunate. It’s not that companies don’t want to provide wide sizes, it’s that it often doesn’t make financial sense to develop them. Offering them is basically a public service.
Usually not. Most boots should be purchased a half size smaller than your true size. Check with the company if this is true for them before making your purchase.

Is it OK to wear boots a size bigger?
Most boots are roomy enough to wear with socks, but if you are in-between sizes and your boot is tight when tried on with socks, you might have to size up a half size. It’s better to have slightly too large boots than slightly too small boots.
If you’ve read a few of my reviews, you know that I never hesitate to criticize an aspect of a boot that needs criticizing — and I’d never recommend anything I didn’t love. In cases where you purchased the correct size of shoe or footwear but you still feel like there isn’t enough room in the toe box, you need to exercise little patience for your fit to break in the boots. Two things you should know: they are expensive, and this is the boot Indiana jones wears in all of his movies. That’s why it’s called the Alden Indy. It’s not a cheap boot, but it is Indiana Jones’s boot and it’s the only quality boot I can think of if you’re unlucky enough to have EEEE feet. They also come in B, C, D, E, EE, and EEE.There’s no need to overthink it: every shoe has a natural break-point where it wants to bend, whether it’s at the bottom of a patched toe box or just where your toes begin, but that’s all you need to know.

Is it okay if cowboy boots are too big?
“The biggest mistake people make is to buy their cowboy boots too big or too small,” Mike says. “When they buy too big, it’s usually because they’re not used to the fit of new cowboy boots. That snugness element is really important and some mistake snugness for being too tight.”
You generally fit a shoe by using your thumb to see where the tip of the longest toe meets the end of the boot. However, in boots, the toe boxes are often much stiffer, making it more difficult to assess.In a situation, where you normally wear a small shoe size, such as a 9.5, but the boots you intend to buy are solely available in whole sizes, go for the in-between size 10 instead of the 9. That relies entirely on how comfortable the boots are once you’ve worn them. Even so, if you’re not certain, there are several ways to check if the boots are a perfect fit. It is preferable to purchase shoes from a store so that you can try them on, but that’s not always possible. A lot of brands, like Thursday Boot Company, are only found online, but these ‘direct-to-consumer’ brands typically allow free exchanges — as long as you haven’t worn your boots outside.

What is my cowboy boot size?
Most men find they must size down 1/2 to 1 full size from their athletic shoe size to get the proper boot fit.
To keep the lights on, some (not all) of my reviews contain affiliate links. That simply means that if you click the link and make a purchase, I may receive a small commission for sending you there. This does not cost you any extra money whatsoever, it just means the origin of the sale is tracked back to Stridewise.Men don’t have a lot of rites of passage. We finish school, we get jobs, maybe we wear a suit, maybe we don’t. We’re told that adulthood starts at 18 or 21, but the older we get the more we realize that isn’t true. Maturity comes slower than that and while this may sound silly, I think one of the marks of manhood is the first time you pay top dollar for a pair of quality, durable, head-turning boots. Read more

Most boots are roomy enough to wear with socks, but if you are in-between sizes and your boot is tight when tried on with socks, you might have to size up a half size. It’s better to have slightly too large boots than slightly too small boots.
For example, my favorite summer shoes are Sabah shoes. The brand recommends that you order a size down from your normal European size, any shoes that are worn without socks need to fit snuggly and without movement in the heel or forefoot to avoid blisters.Do not lower a size to save on toe room. Everything preceding is much more crucial. A small toe box can chafe your feet and develop calluses, but if your flex point, heels, and breadth feel good, there’s no harm in having a larger one.

To begin, put on the socks that you plan to pair with the boots. Then take a seat and put your feet on a piece of white paper that is wider than your feet. Trace the pattern of your feet on the paper with a pencil. (This is easier with a friend.) The pencil should be held slightly inclined towards the outside of the feet, not the inside.You could be able to determine the flex point by looking at the width of the shoe. The shoe’s widest part should match the broadest part of your foot, which is the ball.

Some brands cater to a larger foot, while others cater to a smaller foot, and that’s a bigger concern than the length. Too much compression in the ball of the foot might create soreness and irritation.You can try to size up a half or even a full size if you have wide feet, but be careful. You still want to ensure that the boot’s flex-point matches the natural bend in your foot, which is the widest part from the big toe joint to the little toe joint.Pull-on boots like Chelseas are more difficult because you can’t adjust the fit. You might have a high-instep that makes it difficult to get your foot into the boot, there’s not much you can do for this. So getting the right size is even more important with pull-ons.Afterward, use the largest part of the breadth and length of your feet’s pattern to create a rectangle. Use a yardstick or ruler and measure the rectangle’s width and length.

Should cowboy boots be a size bigger?
Cowboy boots tend to fit larger than regular shoes and sandals, so you may need to go down a half size and in some cases one full size. A lot will depend on how you use the boot and how tight you require them to be for the sake of both utility and comfort. Socks are important.
Summer is the season for light socks and lightweight, flexible boots and shoes. Given how most summer shoes are worn with thin socks or no socks at all, you definitely need to size down if you’re buying boots, sandals, slippers, or loafers.

Is size 11 same as 45?
Most commonly a UK 11 will be referred to as either an EU 45 or EU 46.
If you want a quick answer: measure your feet on a Brannock device (the one they use to size you in shoe stores) and order a half size smaller. This is usually the right approach. (Note these rules don’t apply to women’s boots.)

I was well into my career as a journalist in New York City before I finally realized that grown men don’t walk around town in sneakers and, when it’s a little rainy, rubber galoshes. That the first item of clothing a date looks at is your shoes. That there are a lot of subtle differences between boys and men but a well put together outfit with a sturdy pair of boots is one of the clearest signs that a guy cares how he is perceived by the world.

The same goes for boots like Clark’s desert boot, which is a great warm-weather boot. I’m smack dab between an 11.5 and a 12 on a Brannock device and size down to an 11.
Make sure your foot breaks at the boot’s widest point. Not the width or the heel, but where the boot breaks on your foot is possibly the most essential aspect of fit.Ideally, you should gradually break in your boots. Take a stroll around your area. Work in the garden. Take a day or two off between wears to let your feet recover.Maybe you’re one of the 60% of people who have two different-sized feet. Or maybe, like me, you’re in-between shoe sizes. I’m roughly an 11.7, so I could be sizing up or sizing down depending on the brand.

Hm, to be honest after 4 weeks the leather should have molded a bit around your heel and slippage should have abated. They might be a half size too big. Keep up the thick wool socks I guess!
You might find that you still need to size down a half size from sneaker size, while if you were wearing thinner socks — say, the kind you wear with dress shoes — it’d be a whole size.

The toe line, where your foot flexes, is where all the boot bends. It may appear simple, but if the boot breaks in an incorrect place, it will grind against your feet, causing heel slippage as you stroll or walk, causing the heel to curve and twist, and causing the toe box to pressure your toes.
Most boot companies recommend sizing down a half size from sneakers, so most boots are a half size larger than your sneaker size. A size 12 in sneakers will likely be 115 or even 11 in boots, as sneakers are often a little big.As the boot molds to your foot, the slip should reduce and eventually disappear as the heel counter molds to the contour of your foot due to friction and body temperature. Unlined boots are best for securing the heel if it’s an issue for you, as they have the gripper part of the leather exposed and it becomes very good at grabbing the heels after several usages.Winter boots can be tricky because they sometimes have extra insulation. Some brands adjust the sizing to account for the insulation, and some don’t. Also, winter boots are often waterproof, and waterproof boots won’t stretch as much as leather. Ask the company’s customer service about sizing if you can’t try them on before purchasing.

When testing footwear, the first question many have in mind is how much room they should have in the toe. But actually, it’s the least critical aspect of how boots fit: if the preceding four are correct for you, the length is almost unimportant because your foot will move freely in the boot.
Before you start you’ll want a tailor’s tape measurer (found at any pharmacy), pen, and paper, to help measure the circumference of your feet and compare it to the boot size chartIn order to get the right-sized boots, you can take accurate measurements of your feet at home. A lot of brands have helpful customer support and have helped fit thousands of pairs. You also want to find the size chart for the boot you want to purchase.If your foot does not fold at the threshold of the boot, the arch support isn’t where it should be and that is because the boot is the wrong size, which could result in, flat feet, plantar fasciitis, and inflammation.

Unfortunately, boots and shoes only come as a pair and there are no quarter sizes, so it can be tough to know if you should size up or size down. When purchasing or buying boots, there are several factors you need to consider to ensure you get the best fit for your new boots, such as the ability for your feet to easily move within the toe box and the bottom of your feet to sit perfectly on the sole section of the boot.

If you have flat feet, you’ll definitely need a boot with good arch support or you need room for an insert. If you have a well-maintained arch, it probably doesn’t matter.
The length of the break-in process, on the other hand, is determined by your boots and your feet. Some boots take no time at all for the break-in period while some boots take a while before the boot is molded to the feet.It’s important to note that your foot’s length won’t change throughout the day, but its width may. Your foot swells more at the end of the day, so try on shoes and measure the width in a store in the afternoon. You should also bring thick socks, as most boots are designed to be worn with them.As a basic guideline, it’s preferable to get a slightly larger shoe-size boot than smaller shoe-size boots With the right pair of any boot type, your feet should feel snug.

When dealing with tougher winter fare, you want to pick leather or rubber winter boots and pair them with warm, thick socks. If you’re buying snow boots for the cold season, you want to measure your feet while wearing thicker socks.If you wear boots that are smaller than your exact size, the front of your foot gets squeezed. Also, you could develop hammertoes and bunions. I know that some guys might try a boot they’re excited about only to learn that one size feels too loose and the other puts the flex point at the wrong point. That’s when you have to accept that this particular model’s last isn’t for you.Well, do boots run big or small? It’s not a terrible question, especially if you mostly wear sneakers, because most boots run about a half to a whole size bigger than your average sneakers. Most companies recommend sizing down about a half size, but it can be more complicated than the “size down a half size from your sneakers” rule of thumb.Footwear designers, too, have quite a lot of leeway when it comes to sizing, and surprisingly the same numerical measurements for a boot and a shoe from the same brand may even fit differently because they use different lasts.

Shoes and boots come in a variety of styles and materials to fit a variety of uses. It’s unrealistic to expect your full-grain, steel-toed boots to fit just like your running shoes.
Great review. I have a question about Chelsea boot sizing if you can advise. Should these boots feel very snug? I recently got a pair of Grant Stone Chelsea boots, and they are not snug at all in the size I chose. Other boots with laces fit me well at size 11. These however just feel more loose on the foot in an 11. The snugness does increase some with a wool/ boot sock. So far they still feel good to wear. I have only had an issue when walking on hills for an extended amount of time — foot slipping back/forward and causing pain. Will this go away once the boot breaks in more? I have only had them 3-4 weeks with moderate use. Thans!

It is important to buy boots that have the right foot shape to keep your feet warm and prevent unnecessary ailment at all times even if it’s work boots, military boots, hiking boots, or dress shoes. The wrong size of footwear has a lot of implications as stated in the guide.
It’s true having to wear boots that don’t fit can make you feel uncomfortable. However, if you wear ill-fitting boots for a long period of time, your feet will suffer. Most boots run a half size bigger than your sneaker size, so you should order half a size smaller. But the size is dependent on the company’s designs. Ask customer service before purchasing if you are unsure. Our Reboot site does not recognize your shopping bag or account. If you leave now, the items in your shopping bag may be lost. Additionally, promotions offered at are not valid on the Reboot site and cannot be applied to Reboot orders.

Please note that these are standard recommendations and ideal fits for advisory purposes only. If possible, we recommend a personalized boot fitting session. Please visit one of our locations for more information about this service.The Instep/Vamp: should be snug, but not uncomfortably tight. Adjust to a wider or narrower fit if the instep feels too tight or too loose, respectively. Ideally, the boot will fit snugger over the top of your foot than a regular pair of shoes will. As you wear the boots, the leather will soften and form to your foot.

The Width: Cowboy boots use a lettering system to denote various widths. Not all boots will be available in every width. If a boot isn’t available in your regular width, you may need to size up or down a half size to accommodate for this.
You may need to size down. Cowboy boots tend to fit larger than regular shoes and sandals, so you may need to go down a half size and in some cases one full size. A lot will depend on how you use the boot and how tight you require them to be for the sake of both utility and comfort.The Toe Box: Your toes should be able to move reasonably freely within the boot. This area of the boot will not stretch, so it’s important your toes are comfortable immediately. If your toes feel crowded, try sizing up.

The Heel: This is the only part of the boot that should not feel snug. Your heel should slip roughly ¼”- ½”. If your heel doesn’t move at all, the boots may be too snug and will not be comfortable in the long run. As you wear your boots, the leather will soften and heel slippage will decrease. The more you wear your boots, the more comfortable they will be!
The Ball: This is where your foot (and the boot), will bend, and it should be at the widest point of the boot. If the ball of your foot is too far forward, your toes will be uncomfortably pushed into the toe box. Your foot should comfortably follow the arch of the boot.Socks are important. Make sure you are wearing boot socks, or the same socks you plan to wear regularly. Socks, even thin ones, can add up to half a size to your feet. When it comes to fitting cowboy boots it’s important to keep in mind a few things to ensure you have the proper fit. Not all boots may fit the same. We’ve compiled this boot fitting guide with key information to keep in mind when trying on your next pair of cowboy boots. Put the boot in front of you — keeping your heel on the ground, put your foot in the shaft and using your body weight, push your foot down and into the foot of the boot, while pulling up on the boot with the pull tabs/holes. You should hear a ‘thump’ as your foot slides in.Whether you’re a boardroom cowboy or looking for a pair of boots to wear on the ranch, purchasing the right size is important for optimal comfort. Use the diagram and size chart below to find the right boot for you!

A new pair of cowboy boots should be snug but comfortable right from the start! Properly fitted boots do not require an extended length of time to be “broken in,” contrary to popular belief. Follow the steps below to determine the correct size and fit for your cowboy boots.Choosing the right boot size from the start makes all the difference when it comes to comfort. In general the rule is, the further you get from the letter A, the wider the boot is. This is regardless of gender (more on that difference below). If you have a narrow foot, wear boot insoles to absorb extra width (plus, they add cushion!).

This is one of the most important parts of ensuring a good fit. The leather will stretch to some degree once the boot is worn for a period of time. Once the boot is “broken in,” the snugness will dissipate.The boot needs to be snug around the foot itself, but not uncomfortably tight. If the boot is “roomy” and not snug to begin with, it will become loose and uncomfortable by the time the boot breaks-in.
A cowboy boots should slip a little in the back heel when walking. Boots are built in such a way that there’s nothing to keep your heel from riding up a bit. As you wear the boot, the sole will become more flexible and the slippage should dissipate to some degree. A decent slip is ⅛” to ¼”. If your heel is slipping ½” or more, the boot is most likely too big for your foot. It’s also a good idea to size up or down in the same boot style to compare both snugness and heel-slip. Perhaps even try on another boot in the exact same size and style.It’s generally easier to be sitting down on a bench or chair when trying on boots. Cowboy boots require a little bit of effort to get on, especially when they are brand new, but using the pull tabs or pull holes helps a lot. You should notice a slight “pop” sound when pulling on your boots as your foot gets past the instep. Make sure to bring the type of socks that you plan to use when wearing the boots, since using store footies will not give you the same fit as a regular sock. Once you have both boots on, walk around and see how they feel.

What is 13 EE boot size?
Double-H Boots Size ChartFoot Width (inches)SizeBEE11.53.8″4.6″123.9″4.6″134.0″4.8″
My Boots Are Too Tight. Stretching the boot can often make a significant difference when they are too tight. Most people would agree that cowboy boots become more comfortable as they get “broken in,” and this is essentially what stretching the boot does. “It doesn’t change the size of the boot, it makes the leather more pliable and less stiff,” Mike said.High Instep. Similar to having large calves, some of us have high insteps. Here Jackson’s can stretch the instep area so you can get the boots on and off easier. “ We’ve had many customers claim they cannot wear cowboy boots over the years because of a large instep or calf, but very rarely do we find that we cannot fit them in something.